Only log when a replace occurs?

Get help with installation and running here.

Moderators: DataMystic Support, Moderators, DataMystic Support, Moderators, DataMystic Support, Moderators

Post Reply
dfhtextpipe
Posts: 986
Joined: Sun Dec 09, 2007 2:49 am
Location: UK

Only log when a replace occurs?

Post by dfhtextpipe »

The new tick box option in replace and replace list filters labeled Only log when a replace occurs
does not seem to make a scrap of difference to what gets displayed in the Status tab.

The Status tab displays the same things whether or not the box is ticked.

David
David
dfhtextpipe
Posts: 986
Joined: Sun Dec 09, 2007 2:49 am
Location: UK

Re: Only log when a replace occurs?

Post by dfhtextpipe »

The help file needs to be updated with new images for the replace and replace list filters, so that this tick box is shown.

And of course, the help text requires a new section to adequately describe this option.

David
David
User avatar
DataMystic Support
Site Admin
Posts: 2227
Joined: Mon Jun 30, 2003 12:32 pm
Location: Melbourne, Australia
Contact:

Re: Only log when a replace occurs?

Post by DataMystic Support »

Help file done, and fixed the implementation issue. It was targeted and tested against the 2 simultaneous search types, not the consecutive search types.
dfhtextpipe
Posts: 986
Joined: Sun Dec 09, 2007 2:49 am
Location: UK

Re: Only log when a replace occurs?

Post by dfhtextpipe »

This is now working OK - as observed in the Status tab.

Suggestion: Extend the same idea to an ordinary replace filter.

This should be fairly straight forward.

And also very useful for when it's a sub-filter of Repeat sub-filter X times.

David
David
User avatar
DataMystic Support
Site Admin
Posts: 2227
Joined: Mon Jun 30, 2003 12:32 pm
Location: Melbourne, Australia
Contact:

Re: Only log when a replace occurs?

Post by DataMystic Support »

Thanks, will put on todo list.
Post Reply